This guy got too much time on his hands. Even all that time trimming and editing videos. I don’t think this was a win. I know the amount you have into it is down played. At least 20k and then all the labor time you have into it. Would have been same amount of money and less bullshit to have just bought a decent used one
❤❤ I love to see somebody fixing it, instead of just throwing them away we live in a horrible society. This era that we live in can be known as the throwaway society.
The BEST short I've seen in a long time! Cramming a full explanation, teardown, and rebuild in one short is amazing! I've seen chainsaw rebuilds take multiple videos!
Great job, dude. But, holy guacamoly… 3000 for a used block?! Im so glad i live in a third world country, all of the sudden. How much would a new one cost, i wonder xD
I had an old guy offer to sell me his T62 for $25k had 250 hours on it. He said it ran great. I wasn’t looking for one so I passed. I get the feeling I passed on the deal of the decade..
I used to do work like this and I rebuilt a lot of my old car motors. Engine kits were fairly cheap in the 1980's compared to today so I would refresh the motors on my old JUNKERS and Fully Paint and Detail the engine so when you lifted the hood on my rust bucket there was a brand new engine under the hood.
Correct me if I'm wrong he spent $8,000 on a machine that didn't work then he spent another $3,000 for hopefully a short block that is good and then he spent at least another $1,000 for other stuff.
So we're looking like what at 12,000 just to get this working again realistically what's the price of one of these machines new and all seriousness because if it was worth half that or more I would just say buy new machine or at least you know get one that's running well
The other thing is that the labor your time I don't know how much time he spent on this but if he spent a lot of time on this was it really worth it people forget that all the time
Full teardown and rebuild is on my channel, for the people that always ask super detailed questions of a 3 minute video 🙃
This guy got too much time on his hands. Even all that time trimming and editing videos. I don’t think this was a win. I know the amount you have into it is down played. At least 20k and then all the labor time you have into it. Would have been same amount of money and less bullshit to have just bought a decent used one
❤❤ I love to see somebody fixing it, instead of just throwing them away we live in a horrible society. This era that we live in can be known as the throwaway society.
Nice work big dawg!
Can’t even count how many of these I’ve rebuilt lmao
человеку что знает свой путь – весь мир дает дорогу !!! ) )) каждый щаг – как приближение неизбежной победы !
The feeling of rebuilding an engine and it working is so much more satisfying than just buying a new one
Well done
The BEST short I've seen in a long time! Cramming a full explanation, teardown, and rebuild in one short is amazing! I've seen chainsaw rebuilds take multiple videos!
Nicely made video start to finish in 3 minutes!
👍👍👍
I fear this is a lost art. Guys like you able to do this amaze me. You are the champs!
aint nothin like doin all the work yourself sourcing all the parts yourself paying for it all yourself
ZERO maintenance!
So satisfying to watch especially when you have the right tools and know what you’re doing!!! Bravo 👏
11k not bad! Looks brand new!
Когда не захотел отдавать деньги за ремонт дороги компании, и купил себе бобкэт…)
It used to be a rental by the green paint underneath.
Дело мастера боится!
Great job, dude. But, holy guacamoly… 3000 for a used block?! Im so glad i live in a third world country, all of the sudden. How much would a new one cost, i wonder xD
first time ive seen cam gears, very cool
Great Work !
You usually have to do something really dumb, to hurt those little Kubota diesels.
Did you ever have the Vin checked? to see if it was hot?
If ya send that motor out for a rebuild it would be every bit of 20 to 25k
I had an old guy offer to sell me his T62 for $25k had 250 hours on it. He said it ran great. I wasn’t looking for one so I passed. I get the feeling I passed on the deal of the decade..
Nobody ever plays with that poor doggo (he would have you believe). Lol
It’s lasted for about two hours and boom 💥 didnt know that the crank was cracked. 😢
That first fire up sound was nice.
And then you fit a Baldwin filter, the worst pice of garbage there is 😂😂
Great job!
First time here but I caught a glimpse of that Z in the background
Супер!
Good freaking job!
I used to do work like this and I rebuilt a lot of my old car motors. Engine kits were fairly cheap in the 1980's compared to today so I would refresh the motors on my old JUNKERS and Fully Paint and Detail the engine so when you lifted the hood on my rust bucket there was a brand new engine under the hood.
The amount of “extra” parts I’d have in my possession after that job….nice work.
Not bad 12,500 for now a brand new rebuilt machine
Correct me if I'm wrong he spent $8,000 on a machine that didn't work then he spent another $3,000 for hopefully a short block that is good and then he spent at least another $1,000 for other stuff.
So we're looking like what at 12,000 just to get this working again realistically what's the price of one of these machines new and all seriousness because if it was worth half that or more I would just say buy new machine or at least you know get one that's running well
The other thing is that the labor your time I don't know how much time he spent on this but if he spent a lot of time on this was it really worth it people forget that all the time
That bobcat needs LS1 or 2JZ