Included in our next release, check_netapp_mc_config will provide the possibility to monitor the mode information of a MetroCluster. Example 1: An incomplete installation for a simulator $ ./check_netapp_mc_config.pl -H sim83n1 --local --remote NETAPP_MC_CONFIG CRITICAL - Local: sim83 is not_configured, Remote is missing. Example 2: A productive System $ ./check_netapp_mc_config.pl -H myfiler10 --local --remote NETAPP_MC_CONFIG OK - Local: myfiler10 is configured and in mode normal, Remote: myfiler20 is configured and in mode normal . Configuration: fabric Fyi, DataONTAP’s CLI would return: myfiler10::> metrocluster show Configuration: fabric Cluster Configuration State Mode —————————— ———————- ———– Local: myfiler10 configured normal Remote: myfiler20 configured normal
