How Do You Remove an Old Toilet and Install a New Smart Toilet? + Ultimate DIY Guide + 21 Expert Tips

Introduction to Smart Toilets

Smart toilets have introduced a fundamental change (or nuclear revolution) in modern washrooms. Their heated seats and automatic flushes combine luxury and practicality. The innovative model has always been on the market, and it is time for you to let go of your outdated toilet.
A smart toilet offers multiple advantages, from environmental friendliness to technological expertise to improved cleanliness for your lifestyle.

Why Upgrade to a Smart Toilet?

To the less informed, smart toilets are peripherally known as fancy electronic devices. These designs are primarily aimed at enhancing comfort, hygiene, and even water efficiency. The extent of your need to replace your toilet depends on how long you can afford to wait. Consider replacing it when persistent leaks, clogging, or an old-fashioned appearance become an issue.

Features of Modern Smart Toilets

• The device activates automatic flushes after you finish using it.
• Heated Seats: Warmth on cold mornings? Yes, please.
• Hygiene improvement comes from constructional built-in bidet features.
• Air Dryers & Deodorizers: Say goodbye to toilet paper.
• Remote Controls or App Integration: Adjust settings with ease.

Tools and Materials You’ll Need

Before starting, gather all essential tools. Trust us—preparation will make the process much smoother.

Tool/Material                     Purpose
1. Adjustable Wrench Remove bolts and fittings
2. Screwdriver Set           Handle any screws involved
3. Putty Knife                       Clean old wax and debris
4. Wax Ring/Seal           Create a watertight seal
5. Level                     Ensure the toilet sits evenly
6.Towels/Bucket           Catch excess water
7. Rubber Gloves           For hygiene and safety
8. Voltage Tester           For electrical installation
9. Smart Toilet Kit           Includes all components

Safety Precautions Before Starting

• Begin every job by turning off both the water supply and electric power.
• Wear gloves and eye protection.
• The correct method of carrying objects avoids damage to the back muscles.
• It is prohibited for both children and pets to operate in your workspace.

Step-by-Step Guide: Removing an Old Toilet

Step 1: turning the water supply of the house off

The valve for shutting off the water supply can be accessed behind the toilet and should be turned clockwise until it stops. You will need to flush the toilet to drain all the water in the toilet bowl for the next step. Then, grab a towel or sponge and dry up the remaining water.

Step 2: Toward the toilet bowl in the tank and the bowl itself.

The sponge, vacuum pump, or any tool designed for removing water from the tank and the bowl’s goal is to remove any residual water, creating a dry surface. Controlling spills fulfils this step’s objective.

Step 3: Disconnect the Water Line and Remove the Bolts

You must disconnect the water supply pipe connected to the tank, which is located directly underneath the tank. The toilet must also be removed by unscrewing its two-floor bolts, which are fastened with a wrench placed on the lower side of the tank.

Step 4: Safely Remove Old Toilet

You must rock the toilet to break the wax seal further, allowing the unit to move. After elevating the unit, place a towel and newspapers below it so it can be safely rested.

Step 5 is to clean the area and inspect the flange.

Use a putty knife to scrape off any remaining wax residue. The flange should also be checked for damage or cracks. If the flange is damaged, it must be replaced prior to setting up the new toilet.

Step-by-Step Guide: Installing a Smart Toilet

1. Prepare the Smart Toilet Components

Install a new wax ring or rubber gasket over the flange, ensuring proper positioning. Centering is key for avoiding leaking.

Step 2: Place the Wax Ring or Rubber Seal

Once the mounting bolts are aligned, lower the toilet over the flange while placing it on top. Seal the wax by pressing down firmly. Make sure the bolts are tightly secured while balancing the force applied to them and are done evenly.

Step 3: Mount the Smart Toilet

Reconnect the line for the water supply and continue by turning the valve back on. Ensure all parts of the connection are leak-proof.

Step 4: Connect the Water Line

All toilet models should have the power plugged into an outlet using GFCI protection. The power cord connects with it, making the system remote or control panel testable.

Step 5: Electrical Setup and Smart Features Activation

For retyping something, the manual is necessary, alongside double-checking for all connections.

Step 6: Test and Troubleshoot

Bidet usage, dial heating and drying features, and flushing are all available. When manual operation is involved, remember to double-check all connections. You can also see the Wellfor smart toilet.

Common Mistakes to Avoid

• Not checking the flange for damage
• Over-tightening bolts, which can crack porcelain
• Installing a smart toilet without a nearby GFCI outlet
• Skipping the watertight test
• Not levelling the toilet base properly.

Maintenance Tips for Smart Toilets

Keep your new fixture in top shape with these tips:

• Monthly Cleaning: Use mild, non-abrasive cleaners.
• Descale Nozzles: Especially in hard water areas.
• Check Filters: Replace water filters annually if applicable.
• Software Updates: Some models offer firmware updates via app or USB.

Conclusion

If you’re thinking of swapping out your old toilet for a smart one but dreading the prospect of it, you don’t need to be. You’ll need a few tools and this comprehensive guide. It will make your bathroom much cleaner and more comfortable. Lastly, remember that smart toilets are a safe, profitable investment in hygiene, convenience, and your home’s resale value.

FAQ’s

Can I install a smart toilet on my own?

Yes, if you’re ok with light electrical work and are comfortable with plumbing. Otherwise, hire a pro.

Are smart toilets required to have exceptional plumbing?

Only not usually, but you’ll also need an electrical outlet nearby.

How much would that cost to install in 1?

DIY installs cost as little as $0 (plus the toilet), or professional installs are priced between $150 and $500.

How much time does it take to change a toilet?

Allow 2–4 hours, according to experience.

Is there a benefit to using a wax ring vs. a rubber seal?

Both work well. Wax rings are more traditional; rubber seals are reusable and easier for beginners.

What will happen if I fail to do the flange inspection?

If a flange is broken, it can show itself through leaks later and much bigger repairs.